Online Digital Ammonium Analyzer
Y610-B&Y561-A Online Digital Ammonium Analyzer
Yosemitech Y610-B&Y561-A Online Digital Ammonium Analyzer is an advanced system designed for real-time monitoring of ammonium concentrations in water. By integrating Y610-B Dual-Channel Transmitter with Y561-A Ammonium Sensor, this system delivers precise and dependable measurements without the need for reagents. This makes it an environmentally friendly and cost-effective solution for water quality monitoring.
Features of Online Digital Ammonium Analyzer
Digital sensor, RS485 output, MODBUS protocol
No reagents required, no pollution, more economical and environmentally friendly
Strong passability, supports Yosemitech digital sensors, can connect any two sensors at the same time, improving integration and reduce operating costs
Plug and play, electrode installation, quick and easy to replace
Supports multiple data transmission modes such as 4-20mA, MODBUS RS485, etc
Adopts 5" color touch screen, simple operation interface, reliable system and low maintenance
With time display, data storage and export function
Automatically prompt error and warning information, realizing alarm signal upload
Specification
| Y610-B Dual-channel Transmitter | |
| Display | 5 inch color touch screen |
| Power supply | 110-220V AC |
| Output | One RS485 channel, two 4-20mA channels |
| Relay | 2 relay, program setting response type and response value |
| Communication protocol | The standard MODBUS RS485 communication function enables real-time transmission of measured values |
| Material | ABS housing |
| Storage temperature | -20 to 70 ° C |
| Working temperature | -15 to 60 ° C |
| Temperature pressure | Automatic compensation |
| Size | 151.44mm*144.5mm*117mm (height * width * thickness) |
| Probe type | Support COD, ammonia nitrogen, DO, conductivity salinity, TUR, pH, CHL, BGA, OIW, TSS, chroma, transparency and other sensors |
| Installation | Wall mounting or disk mounting (hole size 138*138mm) |
| Weight | 0.8 kg |
| Data storage | Continuous storage >2 years |
| Name | Ammonium Sensor（without brush） |
| Model | Y561-A |
| Measurement principle | Ionic electrode method |
| NH4_N range | 0-100mg/L （0-1000mg/Loptional） |
| NH4_N accuracy | ±10% or ±0.5mg/L（take the bigger one） |
| NH4_N resolution | 0.01mg/L |
| pH range | 4-10 pH |
| Temperature range | 0-50℃ |
| IP range | IP68 |
| Sensor interface | Supports RS-485, MODBUS protocol |
| Power | 0.25W（suggested power supply: DC 9-24V,≥1A） |
| Sensor size | Φ36mm*265mm（with protective cover） |
| Cable length | 10m(default), customizable |
| Calibration | One or two point calibration |
| Sensor housing material | POM+316L（customizable titanium alloy） |
