Y560-A NH4+ Ammonium ISE Sensor for Water
Y560-A NH4+ Ammonium ISE Sensor for Water
Yosemitech Y560-A NH4 Ammonium ISE Sensor for water measures the concentration of dissolved ammonium as nitrogen (NH4-N) in water. Y560-A NH4 Ammonium Nitrogen Sensor uses pH, Ammonium Ion electrodes, and an optional potassium ion electrode to determine the NH4+-N concentration. It is designed for use in all kind of natural water, such as lakes, streams, rivers, as well as wastewater plants. The ammonia sensor for water measures ammonium electron concentration without using any chemicals. With automatic wiper to clean up the electrode sensing surface and easy electrode replacement, Y560-A provides a quick, simple, and economical solution for ammonium concentration measurement.
Features of Y560-A Ammonium ISE Sensor for Water
Digital sensor, RS485 output, MODBUS protocol
No reagents required, no pollution, more economical and environmentally friendly
Automatically compensates for pH and temperature in water
With automatic cleaning brush to prevent biological attachment and longer maintenance cycle
Built-in calibration parameters, accurately calibrated before delivery, ready for direct installation and use
Specification
Name | Ammonium Sensor（with brush） |
Model | Y560-A |
Measurement principle | Ionic electrode method |
NH4_N range | 0-100mg/L （0-1000mg/Loptional） |
NH4_N accuracy | ±10% or ±0.5mg/L（take the bigger one） |
NH4_N resolution | 0.01mg/L |
pH range | 4-10 pH |
Temperature range | 0-50℃ |
IP range | IP68 |
Sensor interface | Supports RS-485, MODBUS protocol |
Power | 0.1W (non wiping) 1W (wiping); suggested power supply: DC 9-24V, ≥1A |
Sensor size | Φ64mm*271mm（with protective cover） |
Cable length | 10m(default), customizable |
Calibration | One point or two points calibration |
Sensor housing material | POM |
